Black Friday: the specs to check before you buy
Explainer
Updated November 3, 2026Anker 323 Car Charger: 30W USB-C Versions and Cable Bundles
Short answer
The Anker 323 A2735 is the model to look for when buying an Anker 30W USB-C car charger: Anker markets it as 52.5W total, with up to 30W USB-C and 22.5W USB-A. Choose the US B2735 bundle if you need its 3.3 ft USB-C to USB-C cable, or the charger-only A2735 if you already have the correct cable. For a purchase that depends on PPS fast charging, prefer the Belkin BoostCharge 42W if available: Anker's own support table disagrees with its retail specifications.
Our picks at a glance

Clearest PPS alternative, if availableBelkin
Belkin BoostCharge Dual Car Charger 42W (USB-C 30W PD/PPS + USB-A 12W, Black)
- max output
- 30W
- ports
- 2
- Choose
- Belkin documents 30W USB-C with PPS at 3.3–11V/3A, plus a separate 12W USB-A output.
- Limit
- USB-C tops out at 15V, with no 20V profile, so it is a phone charger, not a laptop charger

Retractable cable upgrade, if availableAnker
Anker Nano Car Charger (75W, Built-In Retractable USB-C Cable, Gray)
- max output
- 45W
- ports
- 2
- Choose
- The Nano A2738 supplies up to 45W through its built-in cable and 30W through a separate USB-C port, for 75W total.
- Limit
- 45W is too little to keep a busy 14-inch or 16-inch laptop topped up


- 30WAnker's advertised maximum from the USB-C port
- 52.5WThe US retail pages' combined USB-C and USB-A rating
- 3.3 ftUSB-C to USB-C cable included with the US B2735 kit
Source: Anker's US bundle specifications
Quick picks: choose the package, then the ports

| Choice | Choose it when | Main USB-C output | Other output / combined rating | Cable in this package |
|---|---|---|---|---|
| Anker 323 A2735, charger only | You already own the right cable | 30W advertised; see conflict below | USB-A 22.5W / 52.5W advertised total | None listed |
| Anker 323 B2735, US cable kit | You need a separate USB-C cable | Same A2735 model and advertised outputs | USB-A 22.5W / 52.5W advertised total | 3.3 ft USB-C to USB-C |
| Belkin BoostCharge CCB005btBK | You want clearly documented PPS | 30W; PPS 3.3–11V/3A | USB-A 12W / 42W total | Charger only |
| Anker Nano A2738 | You want a retractable cable and another USB-C output | Built-in cable 45W | USB-C port 30W / 75W total | Built-in USB-C, up to 75cm |
These are manufacturer-rated limits. At our November 3, 2026 source check, Anker's US 323 pages showed In Stock, Belkin's standalone page showed Out of Stock, and Anker's US Nano page showed Sold Out. Treat the alternatives as conditional choices; those maker-store messages do not establish Amazon availability.
For laptop charging and a broader shortlist, use our USB-C car charger guide. This page focuses on identifying the 323 and buying a working phone-charging kit.
Identify A2735: port watts, total watts and bundle codes
Both Anker US product pages name A2735 as the charger model. Their structured product data identifies A2735011 for the charger-only page and B2735011 for the cable kit. The documented package difference is the cable; the B2735 page still calls the charger inside A2735.
The retail specification gives USB-C up to 30W, USB-A up to 22.5W, and 52.5W total. Anker's bundle description explicitly advertises those ports charging devices simultaneously. It does not mean a phone on USB-C receives the combined figure, or that a second phone receives the USB-A maximum regardless of its charging protocol.
Match the printed model, output label and package contents rather than buying from a shortened “Anker 30W” title. The label is especially valuable here because the maker's documentation does not fully agree.
The specification conflict: check voltage profiles and PPS
The US retail specification and Anker's US-facing support table describe the same named 323 family differently:
| Specification | US retail pages | Anker US-facing support page |
|---|---|---|
| Fixed USB-C outputs | 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A; 30W maximum | 5V/3A, 9V/3A; 27W maximum |
| PPS | Not listed in the output specification | 3.3–11V/3A; 30W maximum |
| Total output | 52.5W | “Total Output 30W” |
| USB-A outputs | 5V/3A, 9V/2A, 10V/2.25A; 22.5W maximum | The same USB-A profiles and maximum |
Both pages are US-facing, so this is a conflict within Anker's own US documentation. Neither explains the discrepancy or establishes a separate “PPS version”; confirm the actual unit's output label before relying on either specification.
If a specific profile determines your purchase, ask the seller for the actual output label and confirm it with Anker. If you want an easier PPS purchase decision, use the Belkin alternative below. Our USB Power Delivery explainer covers the terminology; the practical rule is to match the phone's charging requirements, rather than just the largest wattage in the title.
USB-IF describes Power Delivery as allowing each device to take the power it requires. A port's maximum therefore describes capability, not a promise that every connected phone will draw that amount.
Best if you already have a cable: Anker 323 A2735
Choose the charger-only package when your existing cable already connects the charger's USB-C port to your phone. Anker's US A2735 box list names the charger without a cable. Its model-specific manual recommends an Anker cable, the device's original cable or another certified cable.
For a Lightning iPhone, pair it with USB-C to Lightning. Apple specifies that connector combination for earlier iPhones, while an iPhone 15 or later uses USB-C. Buying the C-to-C bundle for a Lightning phone leaves you needing another cable anyway.
The USB-A port is useful if your second device already has a suitable USB-A cable. Keep the phone whose USB-C charging requirements matter on USB-C; don't treat USB-A's advertised 22.5W as an equivalent USB-C charging offer. If both passengers want USB-C outputs, choose the Nano below instead.
Check the charger-only package at Anker.
Best complete USB-C kit: Anker 323 B2735
The US B2735 package adds a 3.3 ft USB-C to USB-C cable. Pick it when you need that cable and its length suits the route from your socket to the phone mount. Check reach with the cable routed around the console, allowing slack at each connector.
The included cable is not Lightning. Anker's US bundle copy states, “Lightning cable required to charge iPhones (not included).” However, Apple's connector guidance distinguishes USB-C iPhones from earlier Lightning models. Follow the connector on your particular phone.
Package information is regional. For example, Anker Japan's A2735011 page explicitly says cables are sold separately. Use the exact US package contents above when comparing a US marketplace offer; a matching family name alone does not confirm its cable.
Check the USB-C cable kit at Anker.
Clearest PPS alternative: Belkin BoostCharge 42W

Belkin
Belkin BoostCharge Dual Car Charger 42W (USB-C 30W PD/PPS + USB-A 12W, Black)
A compact two-port car charger with a 30W USB-C Power Delivery port with PPS and a 12W USB-A port, rated for 12V to 24V DC.
- 30W max output
- 2 ports
Belkin gives a clearer specification for the decision Anker leaves uncertain. Its CCB005 FAQ lists PPS at 3.3–11V/3A, up to 30W. The product page specifies 30W USB-C plus 12W USB-A, 42W total.
For context, Samsung's 25W adapter specification lists PPS ranges of 3.3–5.9V at 3A and 3.3–11V at 2.25A. On paper, Belkin's published range covers those requirements. That is a profile comparison, not a guarantee of a particular speed on every Galaxy, and a 30W port cannot supply a 45W charging mode.
The CCB005btBK choice here is charger only. Belkin documents separate bundles ending -B5 with a Lightning cable and -B6 with a USB-C to USB-C cable; do not transfer those contents to the standalone listing. Consider it if available and PPS certainty matters more than the Anker bundle.
Retractable upgrade: Anker Nano A2738


Anker
Anker Nano Car Charger (75W, Built-In Retractable USB-C Cable, Gray)
A two-output car charger with a built-in 29.5-inch retractable USB-C cable rated at 45W plus a separate 30W USB-C port, for 75W total from a 12V or 24V socket.
- 45W max output
- 2 ports
Choose this for cable storage or two USB-C outputs. The A2738 quick start guide rates the built-in USB-C cable at 45W, the separate USB-C port at 30W, and the charger at 75W total. Anker's product description says the outputs work together without slowing down.
The manual shows cable extension to 75cm. Measure from the socket to the phone's intended position before choosing it over a loose cable. You give up USB-A, and a second phone still needs its own cable for the separate USB-C port.
Do not infer Samsung's 45W mode from the cable's 45W headline alone: the manual lists its variable-voltage range as 5–11V/3A. Choose against your phone's required profiles. For higher power or a different cable arrangement, return to the broader car charger comparison.
How we choose
This is a manufacturer-specification comparison, without physical testing. We cross-check model identifiers, regional box contents, voltage tables and simultaneous-output claims against product pages and manuals. We compare phone requirements with Apple and Samsung documentation and use USB-IF for the Power Delivery principle.
The Anker conflict remains visible because the sources do not resolve it. The 323 links identify Anker's exact US packages; we have not confirmed an equivalent US Amazon bundle, so we do not attach a guessed listing. Check the marketplace seller's current stock, package contents and delivered cost separately.
Buying advice: phone, complete kit and socket fit
Check the exact phone. Apple calls for 40W or higher for its fastest wired charging figure on iPhone 17, 17 Pro and 17 Pro Max. Its fastest wired charging instructions for iPhone 18 Pro and 18 Pro Max call for a 60W-capable adapter. The 323's advertised 30W is below those wattage requirements; having enough power to charge is different from meeting the maker's fastest-charge condition. See our iPhone charger guide before buying purely for speed.
Compare the complete kit. Include the charger, the correct phone cable, shipping and the seller's return terms. If you already own a suitable cable, the bundle has less value to you. If you need a longer cable or Lightning, compare charger-only plus that cable against the bundle plus a replacement. Our fast-charging cable guide helps with the cable choice. No fixed price is needed to make this comparison.
Check the vehicle. Anker lists 12V/5.6A or 24V/3.6A input and a 2.2 x 1.18 x 1.18 inch body for the 323. Those are body dimensions, not a promise about protrusion from your particular socket; allow room for the cable plugs and nearby console controls. Belkin's FAQ also explains that some vehicles stop supplying their accessory socket when switched off. Consult your vehicle manual before expecting parked charging.
Confirm the listing
Match the printed charger model, output label and regional box contents to the maker's documentation.
Compare a working kit
Include the correct phone cable and delivered total, then check seller and return terms.
Check the installation
Confirm the vehicle supply and leave clearance for plugs, cable bends and console controls.
Verdict
Buy the 323 B2735 US cable kit for a USB-C phone if you need the included cable; buy the A2735 charger only if you already have the right cable or need to add Lightning. Treat 30W as the advertised USB-C ceiling and 52.5W as the retail combined rating, while checking the documented profile conflict. Choose Belkin CCB005 if its clearer PPS specification settles the purchase, or Nano A2738 for the retractable cable and second USB-C output, subject to availability.
Frequently asked questions
Is the Anker 323 car charger 30W or 52.5W?
Anker's US retail pages call the A2735 a 52.5W charger: up to 30W from USB-C plus 22.5W from USB-A. That is a combined rating, so a single phone does not get 52.5W. There is a documentation conflict: Anker's support page instead says Total Output 30W and lists fewer fixed USB-C voltage profiles. Check the exact unit's label before relying on a particular profile.
Which Anker 323 bundle should I buy for an iPhone?
For an iPhone 15 or later with USB-C, the US B2735 kit includes a 3.3 ft USB-C to USB-C cable. For a Lightning iPhone, use a USB-C to Lightning cable instead; the included USB-C to USB-C cable will not fit that phone. Choose the charger-only A2735 if you already have the appropriate cable, and check Apple's requirements for your exact model's fastest charging.
Does the Anker 323 support PPS for Samsung?
Anker's US-facing support page lists PPS at 3.3–11V/3A, up to 30W. Its US retail specifications omit PPS and disagree with that support table about the fixed profiles and total output. The conflict is within Anker's own US documentation, which does not explain the discrepancy. If PPS is the deciding requirement, Belkin's CCB005 is the clearer documented alternative, subject to availability; do not assume a 30W port delivers Samsung's 45W mode.
Can the Anker 323 charge two USB-C phones at 30W each?
No. The A2735 has one USB-C output rated up to 30W and one USB-A output rated up to 22.5W on Anker's retail pages. It has no second USB-C port. For a pair of USB-C outputs, consider the Nano A2738: its built-in USB-C cable is rated up to 45W and its separate USB-C port up to 30W, for 75W total.
Will the Anker 323 work in a 24V truck?
Anker's US retail specification lists both 12V/5.6A and 24V/3.6A input for the A2735. That supports using the documented model with either listed supply voltage, subject to your vehicle socket's requirements. Voltage compatibility does not establish physical clearance: Anker lists a 2.2 x 1.18 x 1.18 inch body, and you still need room for the connected cables.
Is the Anker Nano 75W worth buying instead of the 323?
Choose it for the retractable USB-C cable or the second USB-C output. The A2738 manual lists up to 45W on the built-in cable, up to 30W on the USB-C port and 75W total, with a cable extending to 75cm. You lose the 323's USB-A port. Check reach before buying, and check stock: Anker's US Nano page was sold out at our source check.

Clearest PPS alternative, if available
Belkin BoostCharge Dual Car Charger 42W (USB-C 30W PD/PPS + USB-A 12W, Black)
Related guides

Best Wireless Chargers in 2026: Qi2 Stands, Pads and 3-in-1 Stations
The best Qi2 wireless chargers of 2026, from maker spec sheets: 15W MagGo stands, foldable 3-in-1 stations, a Galaxy pad, and the adapter wattage each one needs.
Updated November 7, 2026Read

Anker Prime A2688 vs Satechi 100W Charger: Which to Buy?
Anker Prime A2688 vs Satechi 100W Compact GaN: exact port splits, sizes, cables and travel plugs from the makers, and which kit fits your laptop.
Updated November 5, 2026Read


Satechi 145W vs Anker Prime Fusion: The Four-Port Travel Charger Match
Satechi 145W vs the Prime Fusion-class pick: real port splits for one or two laptops plus phones, plug kits, cables and which complete travel kit wins.
Updated November 5, 2026Read