Skip to content

Free · no sign-up

Downloads

Printable cheat sheets from thisUSB, plus official drivers, firmware and manuals for the gear we cover.

Free cheat sheets

Get all as ZIP
PDF · 2 pages

USB-C Cable Cheat Sheet

Decode any USB-C cable: speed, wattage, video and the logos that tell them apart.

PDF · 2 pages

USB Port Identification Chart

Identify every port on your laptop and what the little symbols next to it mean.

PDF · 1 page

External Monitor Setup Checklist

Get a monitor working through a hub or dock the first time, on Mac or Windows.

Drivers, firmware & manuals

Good news: most USB-C hubs, chargers and cables need no driver at all. 32 of 150 products we cover have optional or required software; they're listed first. Every link goes to the manufacturer's own site, so you always get the genuine, latest version.

No driver needed: USB-C DisplayPort Alt Mode, charging and the USB hub work natively on Windows, macOS and ChromeOS. ASUS's optional DisplayWidget Center app adjusts settings from the desktop; get it from the PA279CRV support downloads page.

No driver needed for video over USB-C DP Alt Mode or mini HDMI. ASUS's optional DisplayWidget Center utility adds auto-rotate and on-screen settings on Windows and macOS.

Thunderbolt 4 and USB-C accessories use Windows 11's built-in drivers. ASUS publishes BIOS and driver updates through MyASUS and its support page; Thunderbolt docks may need firmware updates from their own maker.

No driver needed for core use on macOS 15 or later and Windows 10/11. Anker's optional Dock Manager app (Windows 10+, macOS) handles one-click firmware updates. On 11th-gen Intel Thunderbolt 4 laptops, Anker says the Thunderbolt NVM firmware must be 48.1 or later.

No driver needed for core use on macOS 15+ and Windows 11 over Thunderbolt. Windows users must install CalDigit's 10GbE Ethernet driver for the 10GbE port. CalDigit also publishes Thunderbolt firmware updaters and an optional macOS Docking Station Utility for one-click drive ejection.

No driver is needed for core use: macOS 15 or later and Windows 11 support the TS5 natively over Thunderbolt. CalDigit publishes Thunderbolt firmware updaters for macOS and Windows, an optional macOS Docking Station Utility (one-click drive eject), and a Windows Ethernet driver for Arm-based PCs.

No driver needed: USB-C video, charging and the hub work natively on Windows, macOS and ChromeOS. Dell Display and Peripheral Manager (Windows, and macOS for supported displays) is optional, and Dell posts any firmware updates on the S2725QC support page.

No driver needed: Thunderbolt 4, DisplayPort Alt Mode, the USB hub and Ethernet work natively on Windows 10/11 and macOS. Dell's Display and Peripheral Manager app (Windows and macOS) is optional for window layouts and settings, and Dell publishes monitor firmware updates on the U2725QE support page.

UVC 1.5 webcam, so no driver is needed; Elgato says it works out of the box. The free Camera Hub app (PC and Mac) is optional and adds manual exposure, framing (PTZ) and image controls.

Requires the free Elgato Stream Deck app (Windows or macOS) for configuration; plug-and-play over USB-C with no driver install.

Requires the free Elgato Stream Deck app (Windows or macOS) for configuration; the device itself is plug-and-play over USB-C.

Requires the free Elgato Stream Deck app (Windows or macOS) for configuration; the pedals themselves work over USB-C with no extra driver.

Works as a standard UVC/UAC webcam, so no driver is needed; Insta360 says it can be used directly with third-party platforms and on Linux. Link Controller (Windows 10+ or macOS) is optional and adds tracking controls, modes and Insta360 Virtual Camera effects.

No driver needed: it works as a standard keyboard over the 2.4GHz receiver, Bluetooth or USB-C on macOS, Windows and Linux. Keychron's browser-based Launcher app is optional for remapping keys and macros.

No driver needed on Windows, macOS or Android. Lexar DataShield (Windows and Mac) is optional and only needed for the encrypted safe.

No driver needed. Logitech says Logi Bolt devices' basic functions work without extra drivers on Windows, macOS, ChromeOS and most popular Linux distributions. Pairing additional devices to the receiver is done in Logi Options+ on Windows or macOS.

Plug-and-play UVC webcam on Windows, macOS, ChromeOS and Linux; no driver needed. Logi Options+ or G HUB (Windows and macOS only) is optional for fine image controls such as exposure, white balance and FOV.

No driver needed: pairs over Bluetooth or the included Logi Bolt receiver on Windows, macOS, ChromeOS and Linux, and over Bluetooth with iPadOS and Android. Logi Options+ (Windows 10 or later, macOS 14 or later) is optional and adds Smart Actions, backlight controls, Flow and firmware updates. On a Mac with FileVault, Logitech recommends the Bolt receiver because Bluetooth keyboards may not connect at the pre-login screen.

No driver needed: connect over Bluetooth or the included Logi Bolt USB-C receiver on Windows, macOS, ChromeOS and Linux, or over Bluetooth with iPadOS and Android. Logi Options+ (Windows 10 or later, macOS 14 or later) is optional but required for haptic settings, the Actions Ring, button customization, Flow and firmware updates. Logitech's release notes recommend updating both the mouse and the Bolt receiver firmware through Options+.

No driver needed for core use. On Macs, install OWC Dock Ejector for Apple SuperDrive support and high-power USB charging; OWC's manual says Dock Ejector 2.0.2 disabled the charge-support driver and recommends version 1.1.9 if you need it. On Windows, install Realtek's RTL8156B driver for the Ethernet port.

Driverless on macOS 11+ and Windows 10+ via native Thunderbolt 4 support; Plugable notes Windows may benefit from installing the Realtek RTL8153B Ethernet driver for best network performance. Plugable staff state there are currently no firmware updates for the TBT4-UD5.

Not driver-free. On macOS, install the free DisplayLink Manager app from Synaptics (version 17.0 supports macOS 14 and later; Plugable lists older builds for macOS 11-13) and allow Screen Recording in System Settings, or the external monitors stay blank. On Windows 10/11, the DisplayLink USB Graphics Software for Windows usually installs automatically through Windows Update and can also be downloaded from Synaptics. ChromeOS 100+ needs no driver.

Plug-and-play on ChromeOS, Windows 10/11, current macOS and iPadOS 17 or later; Plugable says the AX88179B version needs no driver. Plugable's driver page has ASIX drivers for Linux, older Windows and older units.

Not driver-free. On macOS, install Synaptics' DisplayLink Manager app (version 17.0 supports macOS 14 and later; Plugable lists builds for macOS 11-13) and allow Screen Recording when prompted, or neither HDMI port shows a picture. If displays stop working after a macOS update, Plugable advises reinstalling the latest DisplayLink Manager. On Windows 10/11, the DisplayLink USB Graphics Software for Windows normally installs automatically through Windows Update and is also on Synaptics' site. ChromeOS 100+ needs no driver.

Works as a standard mouse with no driver on Windows and macOS. Razer Synapse 4 (Windows 10/11, plus a preview for Apple silicon Macs on macOS 15 or later) sets DPI, polling rate and the dongle's LEDs. Razer says current firmware is needed for the 150-hour battery rating.

No driver needed for video, Ethernet, USB or the M.2 slot on SteamOS, Windows, macOS or Linux. Sabrent publishes a firmware upgrade utility for the dock (Windows only, x64 and ARM64) on the product page's Downloads tab. A new SSD in the M.2 slot must be formatted before use.

No driver needed for normal use: it ships formatted as exFAT, which works on both Windows and macOS. Samsung Magician (Windows/macOS) is optional and handles firmware updates and password protection; on a Mac, password protection needs Samsung's portable SSD driver.

No driver needed for normal use: it ships preformatted exFAT and works plug-and-play on Windows, macOS and Android. Samsung Magician (Windows/macOS) is optional for firmware updates; password protection uses Samsung's Portable SSD software, which on a Mac also needs Samsung's driver enabled.

No driver needed: it's plug-and-play on Windows, macOS and Android (Samsung notes some operating systems may require reformatting). Samsung Magician is optional and handles firmware updates and password protection.

No driver needed for normal use: it's plug-and-play over USB-C on Windows, macOS, iOS/iPadOS and Android. Password protection with 256-bit AES requires SanDisk's software download. SanDisk has published firmware updates for some Extreme Portable SSD V2 units; check SanDisk support with your drive's serial number.

No driver needed on Mac, Windows, iPhone, iPad or Android; files open in the built-in Files app. The SanDisk App is optional and adds automatic phone backup.

No driver needed on Windows, macOS, ChromeOS, Android or iPadOS/iOS. For a drive shared between Mac and Windows, use exFAT. On phones and tablets, SanDisk supports the free SanDisk App (v3.1.0+) or the built-in Files app for this model.

Plug-and-play over USB-C DisplayPort Alt Mode on Windows and macOS; no driver needed for basic display use. ASUS lists DisplayWidget and a quick start guide but no mandatory driver.

No driver needed for video over USB-C DP Alt Mode or mini HDMI. ASUS's optional DisplayWidget Center adds auto-rotate and on-screen settings on Windows and macOS.

Plug-and-play on macOS, Windows, ChromeOS and iPadOS; HDMI, USB and PD pass-through use standard USB-C Alt Mode and class drivers, so nothing needs installing.

Plug-and-play on macOS with no driver or software; it uses the MacBook's two Thunderbolt/USB-C ports and Anker does not publish any driver for it.

No driver needed on Windows, macOS or ChromeOS; Anker lists no driver download. On macOS both HDMI ports show the same (mirrored) image because Macs don't support MST, so extended dual displays need Windows.

No driver needed on current macOS (12+), Windows 10/11 or ChromeOS; the HDMI, USB, Ethernet and card-reader functions use built-in OS drivers, and Anker lists no driver download.

No drivers or software needed: it's a wall charger, and USB Power Delivery negotiates the charging speed automatically.

No drivers or software are needed; it is a wall charger that negotiates USB PD 3.1 power with the connected device automatically.

No drivers or software are needed on any OS; it is a power bank that negotiates USB Power Delivery charging with each device automatically.

No drivers or software are needed. It charges compatible iPhones wirelessly over Qi2.2 and negotiates USB PD over its USB-C port automatically.

No drivers or software needed: it's a wall charger, and USB Power Delivery negotiates the charging speed automatically.

No drivers or software needed: USB Power Delivery with PPS negotiates the charging speed automatically.

No drivers or software needed: it's a wall charger, and USB Power Delivery negotiates the charging speed automatically. (Only Anker's separate OTA version uses the Anker app for firmware updates.)

No drivers or software are needed on any OS; it is a power bank that negotiates USB PD charging automatically.

No drivers or software are needed. It charges MagSafe iPhones and other Qi2 phones wirelessly and negotiates USB PD over its USB-C port automatically.

No drivers or software needed: it's a passive plug adapter with built-in USB chargers, and USB Power Delivery negotiates the USB-C1 speed automatically.

No drivers or software are needed; it is a wall charger that negotiates USB PD power with the connected device automatically.

No drivers are needed on any OS; USB PD negotiation is automatic. The optional Anker app (iOS/Android) shows charging details and lets you adjust output settings.

No drivers or software needed. It runs from the included 45W USB-C charger; use a single-port 45W or higher adapter if you replace it.

No driver needed: it is a plug-and-play USB-C dock for SteamOS, Windows and iPadOS. Anker does not publish firmware updates for this model; its Anker Dock Manager app is for other Anker docks.

No drivers or software needed: it's a wall charger, and USB Power Delivery negotiates the charging speed for each port automatically.

No drivers or software needed: it's a wall charger, and USB Power Delivery negotiates the charging speed automatically. macOS shows the connected adapter's wattage under System Information > Power.

No driver or app needed. Apple's steps are to update the iPhone, iPad or Mac and the AirPods Max firmware, then connect with the included USB-C to USB-C cable (or a USB-C to USB-A cable on a USB-A Mac). Keep Bluetooth on for Siri and Spatial Audio.

Nothing to install: AirPods Pro 3 pair over Bluetooth, and their settings are built into iOS, iPadOS and macOS (no separate app). The case's USB-C port only charges.

No drivers needed: Thunderbolt 4, USB4 and USB-C (DisplayPort Alt Mode) accessories work natively in macOS. DisplayLink docks are the exception and need Synaptics' DisplayLink Manager app; some Thunderbolt docks get firmware updates from their maker.

No drivers needed: Thunderbolt 5, Thunderbolt 4, USB4 and USB-C accessories work natively in macOS. DisplayLink docks need Synaptics' DisplayLink Manager app; some Thunderbolt docks get firmware updates from their maker.

No drivers or software needed. Apple says to plug the MagSafe Charger into power before placing the iPhone on it, so it can verify it's safe to deliver maximum power.

No driver or app needed. Connect it to a Mac with the included USB-C cable and it pairs automatically; unplug it for wireless use. Touch ID needs a Mac with Apple silicon on macOS 15.1 or later.

No driver or app needed. Connect it to a Mac with the included USB-C cable and it pairs automatically, then unplug it for wireless use. On iPad, pair it in Settings > Bluetooth (iPadOS 18.1 or later).

No driver needed on a Mac: it connects over Thunderbolt and macOS handles the camera, mics, speakers and USB-C ports. Apple says the camera features and Studio Display firmware updates require a connection to a Mac.

No drivers needed: iPadOS supports USB-C displays, flash drives, hubs and keyboards natively. Expect USB 2.0 speeds from any storage you connect.

No drivers needed: iPadOS supports USB-C displays, external storage, hubs and USB-to-Ethernet adapters natively. Some specialist accessories (audio interfaces, cameras) may want their maker's iPad app.

No drivers needed: iPadOS supports USB-C and Thunderbolt displays, external storage, hubs, docks and USB-to-Ethernet adapters natively. Some specialist accessories (audio interfaces, cameras) may want their maker's iPad app.

No drivers needed: iPadOS supports USB-C displays, external storage, hubs and USB-to-Ethernet adapters natively. Some specialist accessories (audio interfaces, cameras) may want their maker's iPad app.

No drivers needed. iOS handles USB-C displays, storage, Ethernet adapters and USB PD charging natively; for 10Gb/s transfers use a USB 3 (10Gb/s) cable rather than the included USB 2 charge cable.

No driver needed: Thunderbolt, the USB hub and the KVM work natively on macOS and Windows. BenQ's optional Display Pilot 2 app adds settings and window tools, and Palette Master Ultimate handles hardware calibration; check the PD2730S support pages for current versions.

No driver needed for Bluetooth or USB-C audio on phones and computers (Bose's owner's guide gives no driver step). The Bose app (iOS/Android) is optional; it adds EQ, settings and firmware updates.

No drivers needed for charging or file transfer on Windows, ChromeOS or Linux; on a Mac, file transfer needs an Android file-transfer app.

No driver needed: standard Bluetooth earbuds. On Android, Google's companion settings (ANC, EQ, fit, updates) need a phone running Android 6.0 or newer and a Google Account. iPhone, tablets and laptops get basic Bluetooth audio and calls.

No driver needed: plug-and-play on SteamOS and Windows handhelds. JSAUX does not list any firmware or software for this dock.

No driver needed: plug-and-play. JSAUX warns not to apply Nintendo's dock firmware update to it, and it has shipped its own firmware fixes for other Switch 2 adapters after Nintendo system updates.

No driver needed: plug-and-play. JSAUX warns not to apply Nintendo's dock firmware update to it and publishes its own firmware fixes when Switch 2 system updates affect its adapters.

No driver needed for video, charging or the USB-C ports on macOS or Windows. LG's optional LG Switch app (from the 32U990A-S support page) handles split-screen layouts, and LG says Studio Mode needs a USB or Thunderbolt connection plus a firmware update through LG Switch.

No driver needed: it's a standard UVC webcam and USB audio device, plug-and-play on Windows, macOS and ChromeOS. Logi Tune, G HUB or Logitech Capture are optional for zoom, focus and image settings. USB-C-only laptops need a USB-C to USB-A adapter or hub.

No drivers. System updates come over the internet from Nintendo. Use Nintendo's dock for TV output; third-party docks depend on their own firmware to work with the Switch 2.

No driver needed; it mounts as standard USB4 storage on macOS 14+, Windows 11, ChromeOS, iPadOS and Linux. It ships APFS-formatted, so Windows users reformat it first.

No driver needed on Windows, macOS, Linux, Android, iPhone or iPad. Phones need USB OTG support, which current Android phones and USB-C iPhones have.

No driver needed on Mac, Windows, iPhone, iPad or Android. For full speed on a computer, plug into a 10Gbps USB-C port.

No drivers are needed; it is a passive cable, and Thunderbolt 5 speeds depend only on the host and device supporting Thunderbolt 5.

Plug-and-play on Windows, macOS, Linux (kernel 3.0+) and ChromeOS; Plugable states the hub needs no driver installation, though devices you plug into it may need their own.

No driver needed. It uses DisplayPort Alt Mode and MST, which Windows 10/11 and ChromeOS 100+ support natively. On a Mac or iPad it works only as a mirrored or single display.

Plug-and-play on Windows, macOS and Linux; Sabrent states no additional drivers or software are required.

No drivers or software needed. USB PD with PPS negotiates Super Fast Charging automatically. On a Galaxy, make sure Fast charging is on under Settings > Battery > Charging settings.

No drivers or software needed. USB Power Delivery and Samsung's Super Fast Charging negotiate automatically. On a Galaxy, make sure Fast charging is on under Settings > Battery > Charging settings.

No driver needed: the buds pair over standard Bluetooth with phones, tablets and PCs. Galaxy phones on One UI 8.0+ manage them in Settings, and other Android phones use Samsung's free Galaxy Wearable app. iPhone and PC have no companion app and get basic Bluetooth audio only.

No drivers needed. Charging, USB file transfer and DeX over a USB-C to HDMI adapter work without installing anything; Samsung's Smart Switch PC app is optional for backups.

No drivers needed. Charging, USB file transfer and DeX over a USB-C to HDMI adapter work without installing anything; Samsung's Smart Switch PC app is optional for backups.

No drivers needed. Charging, USB storage, hubs and DeX over a USB-C to HDMI adapter work without installing anything; Samsung's Smart Switch PC app is optional for backups.

No driver or app needed: it's a standard USB mass-storage drive. Leave it exFAT to share files between Mac, Windows, iPhone/iPad and most Android phones.

No driver or app needed: it ships formatted exFAT, which iPhone, iPad, Mac, Windows and Android read and write natively. Recording ProRes to it requires a ProRes-capable iPhone (SanDisk lists iPhone 15 Pro/Pro Max and 16 Pro/Pro Max).

No driver needed on Windows 10 or later and macOS 14 or later; it mounts as a standard USB4 storage drive. Full speed requires a USB4 or Thunderbolt 4 port and the included USB-C cable; on older ports it still works at that port's USB 3.2 or USB 2.0 speed.

No drivers needed. Satechi says it's plug-and-play on iPadOS, macOS and Windows; video needs a host whose USB-C port supports DisplayPort Alt Mode.

No driver needed: standard Bluetooth earbuds (the help guide covers Android, iPhone, Windows 11 and Mac pairing). The free Sony | Sound Connect app (Google Play / App Store) is optional; it unlocks LDAC 'Priority on Sound Quality', EQ, DSEE Extreme and firmware updates.

Plug-and-play on Windows, macOS, Linux, iPadOS, ChromeOS and Android using the built-in USB hub driver. StarTech lists no driver or firmware download for this model.

No drivers or software are needed. It charges MagSafe and Qi2 iPhones wirelessly; supported iPhone 16 and 17 models need iOS 26 or later for 25W.

No drivers or software are needed. It charges Qi2 and MagSafe iPhones wirelessly and negotiates USB PD, PPS or Quick Charge over USB-C automatically.

No drivers or software needed. It charges Qi2 and MagSafe iPhones wirelessly and negotiates USB Power Delivery over USB-C automatically.

No drivers or software are needed on any OS; it is a power bank that negotiates USB PD, PPS and Quick Charge with each device automatically.

No driver is needed: macOS 11.4+ and Windows 10+ support the dock natively over Thunderbolt 4/USB4. UGREEN's support center lists no firmware updater or utility for model 25053, only a getting-started guide and compliance documents.

No driver is needed: macOS and Windows support the dock natively over Thunderbolt 4/USB4. UGREEN's support center lists no firmware updater or utility for model 25054, only a getting-started guide and compliance documents.

Common driver sources

  • DisplayLink docks (dual monitors on base-chip Macs): DisplayLink Manager from Synaptics.
  • Thunderbolt: built into macOS and Windows 11. Dock firmware comes from the dock maker.
  • USB Ethernet: built into current macOS, Windows and ChromeOS for common Realtek/ASIX chips.