Skip to content

Black Friday: the specs to check before you buy

Comparison

Updated November 5, 2026

Anker MagGo Power Bank 2 Pro vs UGREEN MagFlow 10K: Which Should You Buy?

Short answer

For an iPhone 17 with a MagSafe-compatible case, choose the Anker MagGo Power Bank 2 Pro (A110R) if magnetic top-ups and a stand matter most. Choose the UGREEN MagFlow 10K (PB773/SKU 65958) if you would rather have a USB-C cable attached to the bank. Both advertise up to 25W wireless, but Anker's manual reveals a crucial limit: wireless falls to 5W while the bank recharges.

See all 2 picks ↓

Our picks at a glance

  • 25WAdvertised wireless maximum for each bank, with different device caveats
  • 5WAnker's wireless limit while the bank itself recharges

Quick picks

  • Anker A110R: our pick for magnetic charging and stand use. The fan, portrait kickstand and higher single-port wired ceiling make it the more flexible choice if you carry a separate cable.
  • UGREEN PB773: our pick for a cable you cannot forget. Its attached USB-C cable also works as a carry strap; confirm the exact socket configuration before purchase.
  • Keep your existing bank if it already meets your needs. UGREEN lists Qi 2.2 modes of 5W, 7.5W, 15W and 25W, so a 25W badge alone is not enough; check your phone’s supported mode.

Identify the exact generation before buying

  • Anker MagGo Power Bank 2 Pro (A110R) in black with its fold-out stand open, side display and cooling-fan vent
  • UGREEN MagFlow 10000mAh Qi2 25W magnetic power bank in light blue-gray, front view with its built-in USB-C cable unclipped and the battery display on the side
  • UGREEN MagFlow 10000mAh Qi2 25W magnetic power bank in light blue-gray, front view with its built-in USB-C cable unclipped and the battery display on the side
  • UGREEN MagFlow 10000mAh Qi2 25W magnetic power bank in light blue-gray, front view with its built-in USB-C cable unclipped and the battery display on the side
  • UGREEN MagFlow 10000mAh Qi2 25W magnetic power bank in light blue-gray, front view with its built-in USB-C cable unclipped and the battery display on the side

This comparison covers A110R, not every product called “Anker MagGo 10K.” Anker's own comparison table puts the Power Bank 2 Pro beside a MagGo Power Bank (10K) with 15W wireless; the page does not identify that counterpart's launch generation. For the wider family, use our Anker MagGo versions guide.

UGREEN's support record identifies PB773 as SKU 65958. Match those identifiers; UGREEN's EU store also lists a different MagFlow Pro power bank with a 45W built-in USB-C cable. For alternatives beyond this pair, see our MagSafe power bank guide.

Exact-model comparison

Figures come from Anker's product page, its A110R manual, and UGREEN's US specifications. Maximums below describe separate operating modes.

Buying difference Anker MagGo Power Bank 2 Pro UGREEN MagFlow 10K
Exact model A110R PB773 / SKU 65958
Battery capacity label 10,000mAh 10,000mAh
Wireless maximum 25W 25W
Wired connection, used alone USB-C socket: up to 45W input or output Built-in USB-C cable/USB-C connection: up to 30W input or output
Wired and wireless together Up to 10W USB-C + 5W wireless Up to three devices advertised; shared wattage split not specified
Wireless while bank recharges Up to 5W Not confirmed in the cited PB773 documentation
Cooling described by maker Smart fan; Cool and Silent modes Metal heat sink and temperature monitoring
Stand Portrait kickstand, up to 80° No stand specified
Dimensions 2.79 × 4.14 × 0.7 in 110.8 × 70 × 21 (mm)
Weight 7.7 oz 254 g
Cable kit Included 1 ft (0.3 m) USB-C cable and storage pouch Attached USB-C cable/strap; the US page lists a 0.5 m CC cable without clarifying whether it is loose

Anker is thinner and lighter, while UGREEN is shorter and narrower. Treat carry preference as a dimensional tradeoff rather than a blanket Anker advantage. These are specification comparisons, not measurements.

Best for magnetic charging and a stand: Anker MagGo Power Bank 2 Pro

Anker MagGo Power Bank 2 Pro (10K, Qi2 25W, Active Cooling)
Best for magnetic charging and a stand

Anker

Anker MagGo Power Bank 2 Pro (10K, Qi2 25W, Active Cooling)

A 10,000mAh magnetic power bank with Qi2.2 25W wireless charging for recent iPhones, a 45W USB-C port, a cooling fan, a display and a fold-out stand.

  • 45W max output
  • 1 port

The A110R is our choice when you want to leave a compatible iPhone attached while viewing it upright. Its manual specifies portrait use only for the kickstand and warns against landscape use, including possible camera interference on some Pro models. Treat that as a real fit restriction when choosing a bedside or video-call setup.

  • Anker MagGo Power Bank 2 Pro (A110R) in black with its fold-out stand open, side display and cooling-fan vent
  • UGREEN MagFlow 10000mAh Qi2 25W magnetic power bank in light blue-gray, front view with its built-in USB-C cable unclipped and the battery display on the side
  • UGREEN MagFlow 10000mAh Qi2 25W magnetic power bank in light blue-gray, front view with its built-in USB-C cable unclipped and the battery display on the side
  • UGREEN MagFlow 10000mAh Qi2 25W magnetic power bank in light blue-gray, front view with its built-in USB-C cable unclipped and the battery display on the side
  • UGREEN MagFlow 10000mAh Qi2 25W magnetic power bank in light blue-gray, front view with its built-in USB-C cable unclipped and the battery display on the side

The fan cools the bank, according to Anker, indirectly helping the phone. In Cool Mode, power output and internal temperature control it automatically; the product page says Silent Mode turns the fan off entirely. Keep the ventilation grille clear. Anker's manual qualifies its below-36°C surface-temperature claim with a 25°C ambient temperature. That is a manufacturer claim under stated conditions, not proof that this bank keeps every phone cooler than UGREEN's.

The USB-C port offers up to 45W output or input alone. Apple's iPhone 17 fast-charge claim is up to 50% in 20 minutes with a 40W or higher adapter. Anker clears that wattage on paper; UGREEN's 30W does not match that particular setup, although this does not establish either bank's charging time.

However, Anker's combined-output row allows only 10W wired plus 5W wireless. Choose Anker for either connection individually; do not buy it expecting both advertised maximums together.

Check Anker A110R price on Amazon

Best with a built-in cable: UGREEN MagFlow 10K

UGREEN MagFlow Magnetic Wireless Power Bank 10000mAh (Qi2 25W)
Best with a built-in cable

UGREEN

UGREEN MagFlow Magnetic Wireless Power Bank 10000mAh (Qi2 25W)

A 10,000mAh magnetic power bank with Qi2 25W wireless charging, a built-in 30W USB-C cable that doubles as a carry strap, and a second USB-C port.

  • 30W max output
  • 2 ports

UGREEN makes the strongest case for someone who often forgets a cable. The attached USB-C lead supports 30W two-way charging, so it can charge a device or recharge the bank. The official US page labels the input and output as USB-C/C-Cabel; confirm the exact socket configuration if you need more than the attached lead.

  • Anker MagGo Power Bank 2 Pro (A110R) in black with its fold-out stand open, side display and cooling-fan vent
  • UGREEN MagFlow 10000mAh Qi2 25W magnetic power bank in light blue-gray, front view with its built-in USB-C cable unclipped and the battery display on the side
  • UGREEN MagFlow 10000mAh Qi2 25W magnetic power bank in light blue-gray, front view with its built-in USB-C cable unclipped and the battery display on the side
  • UGREEN MagFlow 10000mAh Qi2 25W magnetic power bank in light blue-gray, front view with its built-in USB-C cable unclipped and the battery display on the side
  • UGREEN MagFlow 10000mAh Qi2 25W magnetic power bank in light blue-gray, front view with its built-in USB-C cable unclipped and the battery display on the side

UGREEN advertises powering up to three devices at once with smart allocation. One product gallery describes “2 USB-C ports and wireless charging,” but the US specification labels the connection USB-C/C-Cabel and does not clearly distinguish the built-in cable from a separate socket. Neither maker's product pages publish the simultaneous wattage split, so do not assume full output from every connection. For an urgent top-up, charge the priority device alone.

The official gallery descriptions describe a metal heat sink, temperature monitoring and a battery display. Those features do not establish a sustained-speed advantage over Anker's fan. Choose PB773 for the attached cable, rather than an unproven cooling or capacity win.

Check UGREEN PB773 price on Amazon

Phone, case and wireless-mode checks

Apple lists iPhone 17 Qi2 charging at up to 25W, making it a sensible reference phone for this comparison. The Wireless Power Consortium calls the newer standard Qi2 25W; original Qi2 was 15W. “Qi2” without a wattage is therefore an incomplete buying check.

UGREEN’s US page lists Qi 2.2 modes of 5W, 7.5W, 15W and 25W; check the receiver’s supported mode rather than treating every iPhone 12–15 model as 15W without a device-specific source. For iPhone 16, UGREEN’s manufacturer launch announcement names iOS 26 for the series; check the exact model's supported charging mode rather than assuming every family member reaches the headline maximum. Anker also instructs owners to check model and software support.

Do not choose A110R for iPhone 16e: Anker excludes it. Anker's page says Apple devices only, while its FAQ says most Android Qi2 devices receive 15W. That conflict means Android compatibility and output are not confidently established; get explicit confirmation for your phone instead.

Anker says non-magnetic cases are incompatible. For Anker, use a MagSafe-compatible case no thicker than 2.5 mm, or remove it, as its manual recommends. Apple's MagSafe guidance also says to remove cards or similar sensitive items between charger and phone. For a gift, check the recipient's exact phone and case before choosing a color.

Usable capacity: what the evidence actually establishes

Both banks label their batteries 10,000mAh. Anker's capacity support page estimates 5,500–6,500mAh usable, with approximately 35–45% energy loss through the cells and conversion circuitry. UGREEN's US specification separately lists 5,600mAh rated capacity. Neither cited page states a comparable delivered-energy basis.

These are different manufacturer disclosures, not results from a common discharge test. The cited entries do not give a matched output voltage, charging route and procedure. Do not turn them into an efficiency ranking, delivered-energy comparison or guaranteed number of iPhone recharges. Anker's manual says wireless transfer is generally less efficient than wired: use a cable when getting the most from the remaining battery matters.

Likewise, Anker advertises an iPhone 17 Pro reaching 50% in 25 minutes, while UGREEN quotes an iPhone 17 Pro Max reaching 50% in about 38 minutes. Different phones make those unsuitable for declaring a speed winner. Both are manufacturer claims without published test conditions, and neither is a thisUSB measurement or a matched independent comparison.

How we choose

Our picks compare official specifications, manuals, support information and charging-standard documents. We prioritize exact model identity, usable connections and restrictions that change a purchase. The preference for Anker's stand or UGREEN's attached cable is editorial judgment; the sources do not establish a winner for sustained wireless speed or delivered energy. We have no controlled comparison of these banks and do not infer buyer-reported reliability from storefront ratings.

Buying advice: compare the complete kit

Budget for the wall charger you need. Anker's manual recommends a 45W+ PD charger, not included, and the included cable for optimal recharging. Its product page also quotes 80% recharge in 52 minutes. UGREEN specifies up to 30W input; check whether your selected bundle includes a suitable adapter rather than assuming one comes with it. Our USB-C charger guide covers wall options.

Anker's cable wording conflicts. Its product description includes a 1 ft (0.3 m) USB-C cable, and its manual recommends that cable. Yet the product-page recharge graphic says a 45W-capable cable is sold separately. Confirm the supplied cable's capability for your exact bundle before adding a spare or relying on the fastest recharge claim.

Check UGREEN's cable reach. Its EU listing describes a 0.5 m built-in cable, while the US spec merely says “Cable Spec” followed by a 0.5 m CC cable. The US wording does not establish whether that length describes the attached lead or a loose accessory. Confirm it if reach matters.

  1. Match the model

    Look for A110R or PB773/SKU 65958, not only the family name.

  2. Check the phone and case

    Confirm wireless support, software and magnetic-case fit.

  3. Check the whole kit

    Confirm charger, cable capability and reach, seller, delivery and return terms before checkout.

If charging disappoints, first try removing the case, improving alignment and letting the phone cool. Anker's slow-charging guidance identifies heat, alignment and high battery level as reasons charging slows. For more capacity or a different carry format, use our power bank guide.

Verdict

Buy Anker A110R for a compatible iPhone when the portrait stand and fan matter; use one output at a time for its headline performance. Buy UGREEN PB773/SKU 65958 when the attached USB-C cable is the feature you will use daily. Keep an existing bank that meets your needs: neither the shared capacity label nor the newer wireless badge alone establishes a better purchase.

Frequently asked questions

Is Anker MagGo 2 Pro or UGREEN MagFlow 10K better for iPhone 17?

Choose Anker A110R for its cooling fan and portrait stand; choose UGREEN PB773 for its built-in USB-C cable. Both advertise up to 25W wireless charging, which matches the iPhone 17's Qi2 ceiling. Anker offers up to 45W wired input or output alone, versus UGREEN's 30W. These ratings do not establish which bank sustains faster charging on the same phone.

Can the Anker MagGo 2 Pro charge an iPhone while recharging itself?

Yes, but its manual limits wireless output to 5W while the bank recharges. The same manual recommends the included USB-C cable and a 45W or higher PD charger, which is not included. This makes pass-through useful for convenience, but unsuitable if you expect the bank's advertised 25W wireless maximum while plugged into the wall.

Does a 10,000mAh magnetic power bank deliver 10,000mAh to the phone?

No. Anker estimates 5,500–6,500mAh usable capacity for the A110R after losses in the cells and conversion circuitry. UGREEN lists 5,600mAh rated capacity separately from its 10,000mAh battery capacity. Those figures lack a matched output voltage and test procedure in either maker's published specifications, so they cannot establish an efficiency winner or a guaranteed number of iPhone recharges.

Will a regular case work with the Anker MagGo 2 Pro?

Anker's manual says non-magnetic cases are incompatible and recommends a MagSafe-compatible case no thicker than 2.5 mm. If charging or magnetic hold is poor, remove the case and check alignment. A compatible case also does not make every phone a 25W receiver: check the exact phone model and software support before choosing either bank.

Anker MagGo Power Bank 2 Pro (10K, Qi2 25W, Active Cooling)

Best for magnetic charging and a stand

Anker MagGo Power Bank 2 Pro (10K, Qi2 25W, Active Cooling)

See on Amazon

Related guides